// // Pasaban KDD 2500 Sheeter SOLD

Pasaban KDD 2500 Sheeter SOLD

General Information

General Information

FOR GENERAL INFORMATION WE HAVE TO INFORM YOU OF THE FOLLOWING:

This schedule has been prepared solely for the guidance of prospective purchasers and in no way constitutes, and at no time will it be deemed to constitute, an offer or contract or any part of an offer or contract. Additionally, no warranty is given to the accuracy of any measurement, specification or other details whatsoever given within this document.

Whilst every reasonable effort has been made to verify any statement, description or comment made within the document, for avoidance of doubt it is emphasised that the purchaser must make their own enquiries and satisfy themselves.

Please note that all offers are made as lying and subject to contract.

Further technical details, photographs and videos may be available on request.

If you have any specific requirements for wood panel or paper making machinery or wish to sell your spare or redundant machinery then please contact us on john@linnmachinery.com

For more information contact john@linnmachinery.com.

X
Maximum cutting length 1600mm

  • Synchro cutting action
  • Cutting length
  • Maximum = 1600 mm
  • Minimum =400 mm
  • Speed maximum = 400 m/min

AUTOMATIC SLITTER KNIVES

  • Optical fault detection system
  • Automatic slitters positioning.
  • Total no of slitters = 7

MAXIMUM CUTTING LENGTH 1600 mm

  • Automatic pallet feed system
  • Pallet height maximum = 1800 mm

AUTOMATIC SLITTER KNIVES

  • Cutting width minimum =300 mm
  • Slitting accuracy +/- 0.5 mm

MAXIMUM KNIFE LOAD 600 G/M2

  • Maximum knife load = 600 g/m2
  • Cutting accuracy
    • +/- 0.5mm for less than 1000 mm sheet length
    • +/- 0.05% for greater than 1000 mm sheet length
  • Cutting accuracy angle of 0.5 mm per 1000 mm of sheet length

REEL UNWIND STAND

  • 2 unwind stands.
  • Automatic splicers
  • Reel diameter
  • Maximum 2200 mm
  • Minimum 600 mm

REEL UNWIND STAND

  • Reel width
  • Maximum 2500 mm
  • Minimum 500 mm
  • Max with central arm 2 x 1200 mm
  • Core diam 75/100/150/250/300 mm

  • Originally built in1999
  • Unwind section
    • 2 unwinds stands
    • Automatic splicers.
    • Reel diameter
      • Maximum 2200 mm
      • Minimum 500 mm
    • Reel width
      • Maximum 2500 mm
      • Minimum 500
      • Maximum with intermediate arms 2 x 1200 mm
  • Slitter section
    • 7 automatically set slitter knife units
    • Minimum slit width 300 mm
    • Optical fault detector
  • Cutting section
    • Synchro cross cutting action
    • Maximum load under the knife 600 g/m2
    • Cutting length
      • Maximum 1600 mm
      • Minimum 400 mm
    • Speed maximum 400 m/min
  • Stacking section
    • Pallet height maximum 1800 mm
    • Automatic pallet feed
  • Services
    • Compressed air 6 bar
    • Electrical supply 380 V at 50 Hz
  • Spare parts as available
Downloadable PDF