2560 mm deckle Twin Wire Paper Machine SOLD

Daily Production:
110 TPD with size press
150 TPD no size press grades
Deckle:     2560 mm
Operating speed max:  350 m/min
Basis weight range: 100-200 g/m²
Product:             Testliner, fluting.
Raw material:            Waste Paper
Major rebuilds: 1993-1994, 2002 & 2004
Equipment includes stock preparation for 200 TPD, twin wire paper machine, winder.

Pulping
F50 Black Clawson hydrapulper with belt feed conveyor
RCM Select purge TSP 1300 (2000)
Inox BF ‘Ecodrum’ and hydraulic compacting press
High Consistency Cleaning
4 RCM high consistency D200 cleaners
110 m3 stainless steel chest
Coarse Screening
Black Clawson Ultra screen
RCM turbo separator TRB 1200
RCM Rotocleaner TS1000
RCM vibrating screen
Inclined screw thickener
Fine Screening
Comer EC10 pressure screen (2001)
Comer EC20 pressure screen (2000)
Comer EC5 pressure screen (2001)

The bottom wire approach system is as follows:
(1st) stage of (5) Palmac low consistency cleaners, P300 type (year 1994);
(2nd) stage of (2) Palmac low consistency cleaners, P300 type (year 1994);
low consistency pressure screen for headbox protection (RCM, EPV1250-n type, year 2001).

The top wire approach system is as follows:
(1st) stage of (5) Palmac low consistency cleaners, P200 type (year 1994);
(2nd) stage of (2) Palmac low consistency cleaners, P300 type (year 1994);
low consistency pressure screen for headbox protection (Black Clawson, year 1994).

Type of approach flow systems: single dilution.

Bottom Layer
KMW pressurised headbox (2002)
Design speed 600 m/min
Fourdrinier by Metso
Cantilevered
Ceramic foil and low vacuum tops
PE covered vacuum boxes
Pneumatic stretch
Wire cleaning sprays etc

Top Layer
Over Meccanica pressurised headbox (1994)
Fourdrinier by Metso
Cantilevered
Ceramic foil and low vacuum tops
PE covered foils, low & high vacuum box tops
Pneumatic stretch,
Wire cleaning sprays

Over Meccanica felted lump breaker roll
Maule double felted 1st press (90 kN/m)
     Bottom roll  590mm
     Top roll  590mm
GS Meccanica ‘Jumbo Press’
(240 kN/m) with
Top roll of 880 mm diameter plain rubber roll
Bottom roll of 880 mm diameter, blind drilled and felted
Cantilevered frame
Felt conditioning systems
Felt stretching and guiding systems
Paper dryness out of press = 45%

19 Pre-dryer cylinders
1st section with 11 cylinder of 1250 mm diameter in slalom
2nd section with 8 cylinders of 1500 mm diameter
Felt stretch and guide systems
Central lubrication for cylinder bearings
Totally enclosed hood

Size Press
Installed in 2000 by Toscotec
Starch conversion cooker

8 After Dryer cylinders of 1500mm diameter
1st cylinder chrome coated
Felt stretch and guide systems
Central lubrication for cylinder bearings
Totally enclosed hood
Cascade steam system control for all cylinders

Over Meccanica reel up with 11 reel spools
Tail feeding through machine by rope system
Format Automation QCS system installed in 2007

Over Meccanica winder
Max diameter of reel   1400 mm
Maximum speed        800 m/min
2 edge trim knives
Tension, nipload  and torque control
Installed power 110 kW
Trim removal system

Please note all of the associated stock preparation equipment is also included, such as
pumps with motors
manual and controlled valves
agitators and motors
spare baskets, rotors and impeller for screens

Spare rolls and clothing available
Documentation and drawings as available.